Management Control Process includes the following Steps:
1) Establishing Standards
2) Measurement of Performance
4) Taking Corrective Action.
In order to perform his control functions, a manager follows three basic steps. First of all, he establishes the standards of performance to ensure that performance is in accordance with me plan. After this, the manager will appraise the performance and compare it with predetermined standards. This step will lead the manager to know whether the performance has come up to the expected standard or if there is any deviation. If the standards are not being met, the manager will take corrective actions, which is the final step in controlling.
1) Establishing standards: A standard acts as a reference line or basic of comparison of actual performance. Standards should be set precisely and preferably in quantitative terms. It should be noted that setting standards is also closely linked with and is an integral part of the planning process. Different standards of performance are set up for various operations at the planning stage, which serve as the basis of any control system. Establishment of standards in terms of quantity, quality or time is necessary for effective control. Standards should be accurate, precise, acceptable and workable. Standards should be flexible, i.e., capable of being changed when the circumstances require so.
2) Measurement of performance: This step involves measuring of actual performance of various individuals, groups or units and then comparing it with the standards, which have already been set up at the planning stage. The quantitative measurement should be done in cases where standards have been set in quantitative terms. In other cases, performance should be measured in terms of quantitative factors as in case of performance of industrial relations manager. Comparison of performance with standards is comparatively easier when the standards are expressed in quantitative terms.
3) Comparison: This is the core of the control process. This phase of control process involves checking to determine whether the actual performance meets the predetermined or planned performance. Manager must constantly seek to answer, “How well are we doing?” When a production supervisor checks the actual output or performance of his department with the production schedule, he is performing comparison aspect of control. When-an executive calculates the performance of his subordinates once in six months or annuity, he is performing comparison aspect of control. Checking return on in investment is a comparison phase of control.
4) Taking corrective action: The final step in the control process is taking corrective actions so that deviations may not occur again and the objectives of the organization are achieved. This will involve taking certain decision by the management like re-planning or redrawing of goals or standards, assignment of clarification of duties. It may also necessitate reforming the process of selection and the training of workers. Thus, control function may require change in all other managerial functions. If the standards are found to be defective, they will be modified in the light of the observations.